Installation Steps

Tools Required

  • Tape
  • Level
  • Angle Grinder
  • Drill

Step 1

  • Measure and find the level at the bottom of the wall
  • Install Starter Strip

Step 2

Measure and cut the panel with angle grinder (fine blade)

Step 3

  • Clip bottom of the panel into Starter Strip 
  • Ensuring all clips are securely locked in

Step 4

  • Join the panels together and ensure all fingers are locked in.  
  • Fasten with screws at the top of each panel. 
  • Remember to stagger the panels on the next row.  

Step 5

  • Finish the installation by capping all sides & top of the panels 
  • Timber Capping
  • Metal Capping
  • PVC Capping